 |
 |
 |
 |
Compatible Liquids
Gasoline, kerosene, diesel, light oils & non-potable water
Power
Two (2) "AA" Batteries, Not Included!
Delivery Volume
2.6 Gallons per Minute
Suction Tube Diameter
1.3 inch
Applications
Any non-corrosive such as gas, diesel, kerosene, non-potable water
Package Dimensions
1.70 x 23.30 x 4.40 inch
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features

-
Features - • 2.6 Gallons per Minute. Increased suctioning power with impeller head
- • Applicable Liquids: Any Non-Corrosive Liquids such as gas, diesel and water (NOT for Drinking Water), etc...
- • Suction Type: Battery Powered Liquid Transfer Pump
- • Useful in the garage, basement, bathroom, shop or yard.
-
- How to Operate
- 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
- 2. Insert the tube into a container to receive the liquid
- 3. Turn the pump on. Caution: Do Not over fill the container. Avoid pumping liquid to a container higher than the pump's motor housing
- 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump
- 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extend the life of the pump
-
- Power
-
- Operates with Two (2) "AA" Batteries, Not Included!
-
-
- Application
-
- Any non-corrosive such as gas, diesel, kerosene, non-potable water
-
-
- NOT Compatible
-
- Thinners or solvents, hot water, drinking water, acetone, benzene, creosol, ethyl, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid etc
-
|
|
 |
 |
 |
 |

|