 |
 |
 |
|
 Compatible Liquids
Gasoline, kerosene, diesel, light oils & non-potable water
Power
Two (2) "D" Batteries, Not Included!
Discharge Hose
23.5 inch + 4.5 inch Nozzle
Delivery Volume
2.4 Gallons per Minute
Auto-Stop
Built-in Auto-Stop System
Applications
Any non-corrosive such as gas, diesel, kerosene, non-potable water
Package Dimensions
2.25 x 23.00 x 4.50 inch
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
-
Features - • Simple Power Switch: Switch to on and you're ready to go
- • Auto-Stop Sensor Mechanism: Pump warns when it is at capacity, Protecting from leaks and liquid overflow
- • Suction Type: Battery Powered Liquid Transfer Pump
- • Battery Operated: Uses only 2 AA Alkaline Batteries (NOT Included)
- • Delivery Volume: 10 Quarts / Min or 2.4 Gallons per Minute. Increased suctioning power with impeller head
- • Application Liquids: Any Non-Corrosive Liquids such as gas, diesel and non-potable water
-
How to Operate - 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
- 2. Insert the tube into a container to receive the liquid
- 3. Turn the pump on. Caution: Do Not over fill the container. Avoid pumping liquid to a container higher than the pump's motor housing
- 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump.
- 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extends the life of the pump
-
- Power
-
- Operates with Two (2) "D" Batteries, Not Included!
-
-
- Application
-
- Gasoline, kerosene, diesel, light oils & non-potable water
-
-
- NOT Compatible
-
- Thinners or solvents, hot water, drinking water, acetone, benzene, creosol, ethyl, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid etc
-
|
|
|
|
|
|
|